 |
| |
|
 |
| |
Hydraulic Tensioner
MODEL T70-2H FOR 1 OR 2 CONDUCTORS
| SPECIFICATIONS |
| Max. intermittent tension 7500daN (16535 lbs.) |
| Max. continuous tension 7000da N (15450 lbs.) |
| Maximum linespeed 6.0 km/hr (3.7 mph) |
| Bullwheel Diameter 1397mm (55´´) |
| Groove Diameter 10@40mm (1.57) |
| Engine Power 15.6 kW (21hp) |
| Weight (Approx.) 3810 kg (8400lbs.) |
| Lenght (Approx.) 5400mm (212´´) |
| Width (Approx.) 2050mm (81´´) |
| Height (Approx.) 2300mm (90´´) |
|
| STANDARD EQUIPMENT |
| Large diameter linepull gauge |
| Infinitely variable tensioning control |
| Spring applied hydraulic brak |
| Powered hydraulics |
| Air cooled diesel engine |
| Single axle trailer mounted |
| Tail fairlead with urethane rollers |
| Freewheeling of bullwheels |
| Width (Approx.) 2050mm (81´´) |
| Height (Approx.) 2300mm (90´´) |
|
|
 |
Bullwheel Tensioner
MODEL T50/42 BW
FOR TRANSMISSION CONDUCTOR INSTALLATION
| SPECIFICATIONS |
| Continuous rated tension 2268 daN (5000lbs.) |
| Linespeed 0-6 km/hr (0-4 mph) |
| Bullwheel diameter 1066mm (42´´) |
| Max.Conductor diameter 35mm (1.39´´) |
| GVWR 4830 kg (10,650 lbs.) |
| MODEL T50/48 BW |
| Continuous rated tension 2268 daN (5000 lbs.) |
| Linespeed 0-6 km/hr (0-4 mph) |
| Bullwheel diameter 1220mm (48´´) |
| Max. Conductor Diameter 35mm (1.39´´) |
| GVWR 4830 kg. (10.650 lbs.) |
|
| STANDARD EQUIPMENT |
| Smooth tensioning of conductors |
| Hydraulic disc brakes, equal retarding to bullwheels |
| Replaceable urethane bullwheel lining segments |
| Tail fairlead with 3 rubber lined rollers |
| Tandem axle with leaf spring suspension |
| Adjustable tow eye, safety chains. |
| Highway lighting. |
| |
| |
| |
|
|
|
Bullwheel Puller
MODEL P200 & 9250 MODEL P200
| SPECIFICATIONS |
| Maximum linepull 9091daN (20000 lbs) |
| Maximum linespeed 8km/hr (5mph) |
| Bullwheel diameter 610mm (24´´) |
| Power 120 kW (11000lbs.) |
| Weight (Approx.) 5000kg (11000lbs) |
| Length (Approx.) 2130mm (84´´) |
| Width (Approx.) 2030mm (80´´) |
| Height (Approx) 2030mm (80´´) |
| STANDARD EQUIPMENT |
| Four speed automatic transmission |
| Hydraulic torque converter |
| Automatic overpull protection system |
| Automatic holding brake |
| Tail and tower fairleads |
| Hydraulic control for reel winder |
|
| MODEL P250 |
| Maximum linepull 12000daN (26400lbs) |
| Maximum linespeed 6.4 km/hr (4mph) |
| Bullwheel diameter 610mm (24´´) |
| Power 120kW (160hp) |
| Weight (Approx) 6800kg (14960lbs) |
| Length (Approx) 6850mm (270´´) |
| Width (Approx) 2130mm (84´´) |
| Height (Approx) 2030mm (80´´) |
|
|
|
Bullwheel Puller
MODEL P80-2H
| SPECIFICATIONS |
| Maximum linepull 8000daN Single Rope |
| 4000daN Two Ropes (Each) |
| Maximum linespeed 5km/hr (3.1 mph) |
| Maximum rope diameter 18mm (25/32´´) |
| Bullwheel diameter 457mm (18´´) |
| Power (Diesel) |
| 113kW (152hp) |
| Length(Approx) 5588mm (220´´) |
| Width (Approx) 2235mm (88´´) |
| Heigth (Approx) 2438 (96´´) |
|
| STANDARD EQUIPMENT |
| Two independent hydraulic drives for each pulling rope |
| Infinitely variable speed and linepull control |
| Automatic overpull protection system |
| Spring applied,hydraulic release brakes |
| Single axle trailer |
| Auxiliary hydraulic circuit for separate reelwinder |
|
|
